- #Delta family quick start guide install#
- #Delta family quick start guide full#
Cellular providers often have 'roaming agreements' with towers they do not own and usually do not allow devices like cellular trail cameras to benefit from these agreements. Checking antenna for damage or proper attachment. This can be from just a few feet to another location entirely. 
Moving camera to an area with better cellular coverage. If your camera does not connect to Moultrie Mobile, try the following: If the SD Card is compatible, formatting the SD Card will typically correct and prevent any SD Card errors. Do not use SDXC cards, Micro/Mini cards, Ultra Capacity or High-Speed cards. Make sure that you are using a new 4GB-32GB class 10 SD Card. #Delta family quick start guide full#
SD Cards will sometimes cause errors when they are old, corrupted, full of images, previously used by other cameras, too large, or specialized high-speed cards. Refresh your app or website to ensure your picture was uploaded. Press and hold the Connect/Status button for at least 5 seconds The Status LED light will remain lit while the picture is being transmitted. If you see any yellow or red lights, use the chart below to identify the status. The lights will indicate the camera's status and server connection. Important: You should see the light sequence begin after the 15 second delay and/or when formatting the SD Card is complete. The SD Card light will turn green once the process is complete. 
Note: This will permanently erase all data on the SD Card.ĭuring the 15 second delay after powering your camera on, press and hold the Format SD Card button until the SD Card LED light blinks yellow, then release. Then, your camera will connect to Moultrie Mobile and the LED lights will indicate camera status.
There will be a 15 second delay to allow time for you to format the SD Card (see next step). Press and hold the ON/OFF button until LED lights illuminate (about 3 seconds).
#Delta family quick start guide install#
Once your camera is activated, install 12 new AA recommended lithium batteries and a recommended Class 10 SD Card. Select Account> Activate Device and follow the on-screen instructions to choose your plan and activate your device. Log in to your Moultrie Mobile account through the app or at. Congratulations! Now that you have your new Delta Camera please see the video and step-by-step instructions below for activating your camera.
0 kommentar(er)
